不同插值方法在海域气象参数估算中的可靠性评价          下载免费PDF全文

艾葳  万继敏  崇元 《海洋技术学报》2019,38(2)

海域条件下的气象观测具有数据稀少、变化大且观测站点分布不均的特点,其插值精度受插值方法影响较大。首先对常规插值方法进行理论分析,进而选取了反距离加权法、克里金法和样条函数法三种插值方法进行了插值实验和精度分析。根据渤海湾某区域的气象历史数据,采用不同方法绘制了温度、压强和湿度的插值平面图,并基于交叉验证的方式对各插值方法进行了对比,给出了不同方法的插值估算可靠性评价。结果表明:温度、压强和湿度的插值精度均是基于反距离加权法的插值结果最优(MAE_(温度)=2.42,RMSE_(温度)=1.92,MAE_(压强)=2.05,RMSE_(压强)=1.30,MAE_(湿度)=11.394, RMSE_(压强)=6.43),同时基于反距离加权法的图形绘制可视化效果也要优于其他两种方法。研究结果可为海域气象参数估算提供理论和实践依据。  相似文献   

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS          下载免费PDF全文

JIANG Feng  CHEN Xiao-bin  DONG Ze-yi  CUI Teng-fa  LIU Zhong-yin  WANG Pei-jie 《地震地质》2019,41(6):1444-1463

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.  相似文献   

A Review of the Calculation Formula for the Four-component Borehole Strainmeter and Application to Earthquake Cases   总被引：1，自引：0，他引：1  

SU Kaizhi 《中国地震研究》2019,33(1):132-146

Based on the principle formula for the four-component strainmeters, we can directly obtain the specific plane strain, shear strain and azimuthal angle of the principal strain, and the maximum and minimum principal strains calculated afterwards are the indirect result. The problems of practicality of the sensitivity coefficients A and B of plane strain and shear strain are then discussed. Based on this idea, we analyzed the observation data of several four-component borehole strainmeters near the epicenter of the Yiliang M_S5.7 earthquake in 2012 and the Ludian M_S6.5 earthquake in 2014 in the Zhaotong area, Yunnan Province. The results show that the analysis based on the perspective of plane strain and shear strain has an obviously better effect than that based on the component readings, and can directly peel off the respective abnormality of the plane strain and shear strain. In addition, the correlation coefficient curves between measured data of two plane strains show significant anomalies which often occur several days before and during the earthquake.  相似文献   

大数据环境下地震观测数据存储方案研究     

单维锋  滕云田  刘海军  杨冠泽 《中国地震》2019,35(3):558-564

大数据技术为处理海量地震观测数据提供了一种新的数据存储与计算模式。为了解决现有基于关系数据库存储方案的读写速度低、用户并发度低和可扩展性差等问题,以地震前兆观测数据为例,在详细分析业务需求的基础上,提出了基于HBase和Open TSDB的地震大数据存储方案,搭建了大数据测试平台,完成了不同存储方案下查询、插入性能实验和并发性实验。实验结果表明,与关系数据库存储方案相比,基于HBase和Open TSDB的存储方案具有很好的可扩展性和并发性,经过优化后的HBase存储方案具有更高的读取和存储性能。  相似文献   

内蒙古中部地区形变主要干扰的时频响应特征分析     

张小艳  熊峰  王旭东  赵星  刘永梅  刘芳 《中国地震》2019,35(4):718-725

选取内蒙古中部地区定点形变观测中受降雨、大风、气压干扰以及地震波影响的典型数据，采用S变换，对该地区形变观测中4种主要干扰信号的时频响应特征进行分析与讨论。结果表明，降雨干扰信号主要集中在低频区域，其频率先增大后减小；大风干扰表现为高频干扰，时频域能量强度与观测曲线受风扰影响变化幅度成正比；气压干扰信号的优势频率分布在低频段内；地震波影响中VP垂直摆和JCZ地震计记录的地震波较为相似，但VP垂直摆记录的频段要小于JCZ地震计，VP垂直摆主要记录的是低频地震波。同时，4种干扰信号的时频域频率、能量强度随时间变化趋势与数据观测时域变化趋势相一致。  相似文献   

地震观测仪器自动监控软件设计与实现     

姜佳宁  吴利军  徐磊  赵祖虎  方宏 《地震地磁观测与研究》2019,40(4):167-175

结合地震地球物理观测台网台站监测工作实际，研制一款地震观测仪器自动监控软件。该软件适用于不同网络环境下IP类仪器设备的网络实时或定时自动监控，地球物理观测类仪器时钟、状态和观测数据的定时自动监控，能自动识别当日观测数据中的无效数据、变幅异常、干扰、地震和限幅等信息，无需借助其他硬件和软件即可将告警信息以短信方式发送给值班人员和管理人员，可实现对仪器原始观测数据的自动备份和手动恢复，及对仪器的一键重启和校正时钟等控制类操作，无需跨平台操作即可查看当日观测数据曲线及分析数据的完整性和有效性，从而实现对仪器的统一高效管理。  相似文献   

Local Oceanic Vertical Deflection Determination with Gravity Data Along a Profile     

Jianbo Wang  Xin Liu  Yi Shen  Qiaoli Kong 《Marine Geodesy》2018,41(1):24-43

Deflections of the vertical (DOVs) over oceans cannot be directly measured, which restricts their applications. A local covariance function of anomalous potential is put forward in this paper in conjunction with the least-squares collocation (LSC) method to compute the oceanic DOVs utilization of oceanic gravity data along a profile. The covariance functions of gravity field quantities have been derived directly as functions of x, y and z without the need to introduce coordinate transformations corresponding to along- or cross-profile components. In the proposed methodology, gravity data along a profile were used to calculate the residual gravity anomaly using the remove-compute-restore technique. The residual gravity anomaly was used to calculate the parameters of the proposed covariance function of the local anomalous gravity field, which was used in the LSC to compute the residual DOVs along the profile. The residual DOVs added model DOVs to recover the DOVs along the profile. The results of a simulation experiment prove that the proposed methodology is feasible and effective.  相似文献   

全球Argo资料共享与服务平台设计与实现     

吴森森  曹敏杰  杜震洪  张丰  刘仁义  董贵莹 《海洋通报》2018,(3):287-295

Argo资料已成为海洋环境和气候变化研究重要的实测资料来源和基础数据支撑。自2007年全球Argo实时海洋观测网建成以来,每年产生的Argo资料稳固增长,数据总量呈现出海量增长趋势,如何实时有效地对Argo数据进行组织管理与信息服务已成为当前Argo资料共享的关键难题。本文针对Argo数据多源异构的时空特性及多元化的信息服务需求,综合运用分布式混合数据库架构,设计了一种适用于全球Argo资料组织管理的弹性扩展云存储模型,建立了基于Matlab的Argo网格化产品高效可视化方法,构建了基于Flex RIA的WebGIS服务框架,并研制了"全球Argo资料共享与服务平台"实例。平台实现了对全球Argo资料的查询浏览、快速下载及可视化分析等功能,并已在中国Argo实时资料中心部署及对外服务。  相似文献   

Research and Test of Real-time Search Algorithm of Fast Radio Bursts Based on GPU Acceleration     

WANG Jun  CHEN Mao-zheng  PEI Xin  WANG Zhi-qiao 《Chinese Astronomy and Astrophysics》2018,42(2):313-324

In order to satisfy the research need of Nanshan 25 m radio telescope of Xinjiang Astronomical Observatory (XAO) and study the key technology of the planned QiTai radio Telescope (QTT), on the basis of the original CPU (Central Processing Unit)-based real-time search algorithm of FRBs (Fast Radio Bursts), we have studied the GPU (Graphics Processing Unit)-based real-time search algorithm of FRBs, and built the corresponding real-time search system of FRBs. We have made the comparison and analysis on the GPU system and CPU system, the test result shows that under a given searching accuracy, the speed of the GPU-accelerated algorithm is improved by 35–45 times compared with that of the CPU algorithm.  相似文献   

基于MPI并行算法的电阻率法多种装置数据的三维联合反演          下载免费PDF全文

马欢  郭越  吴萍萍  谭捍东 《地球物理学报》2018,61(12):5052-5065

由于地表电阻率法受到浅地表局部异常体的干扰，反演精度受到影响，井中装置数据资料参与反演虽然可以减小浅地表局部异常体的干扰，但是由于钻井位置的局限性，数据量得不到保障，也会导致反演精度降低.为此，本文开发了一套结合地表、地-井、井-地和井-井装置数据的三维联合反演算法.首先，利用有限差分法实现正演模拟，采用非线性共轭梯度法（NLCG）恢复电阻率结构；其次，调用Message Passing Interface（MPI）函数库加速正演模拟和灵敏度矩阵运算，当开辟12个进程时，反演程序获得最大加速比4.51；最后，通过合成数据和实测数据算例证明该反演算法的有效性，也证实了多种装置组合数据体反演结果明显优于单一地表装置数据体反演结果.  相似文献